tubing size matter?

nd4topspd · 05-02-2009, 08:52 AM

HI I am thinking about setting up with hard lines. I work in a plant where we use tubing to feed all our instrumentation and controlers. Out there we use 1/4 and 1/2 inch tubing. I see that the tubing and tools on Nitrous Outlet are 1/8 and 3/16. Can I go with 1/4 inch lines on my setup and what troubles could I run into?

Chris@NitroDaves · 05-04-2009, 08:13 AM

For all the -4 connections you could use the 1/4in tubing but that all you would be able to use it for as the nozzle or plate uses a -3 connection which uses the 3/16 tubing.

-Chris

05-02-2009, 08:52 AM	#1
nd4topspd Nitrous Tech n00bie Join Date: Apr 2009 Location: Ulysses Ks Posts: 37	tubing size matter? HI I am thinking about setting up with hard lines. I work in a plant where we use tubing to feed all our instrumentation and controlers. Out there we use 1/4 and 1/2 inch tubing. I see that the tubing and tools on Nitrous Outlet are 1/8 and 3/16. Can I go with 1/4 inch lines on my setup and what troubles could I run into?

05-04-2009, 08:13 AM	#2
Chris@NitroDaves Tech Adviser Join Date: Feb 2008 Location: Waco, TX Posts: 477	For all the -4 connections you could use the 1/4in tubing but that all you would be able to use it for as the nozzle or plate uses a -3 connection which uses the 3/16 tubing. -Chris __________________ Nitrous Outlet Your #1 Nitrous Source! For Tech or just questions you can PM, Call ( 1-866-648-7637 ) or email me @ Chris@NitrousOutlet.com Info can be located @ www.fquick.com/Skizzy